HAIMA 7 - Inner Trim; Disassembly;Assembly of Column a Trim Panel; Removal of Lower Trim Panel of Column B; Disassembly;Assembly of Upper Trim Panel of Column B

Inner trim panel
S-46
Inner trim
Disassembly/assembly of column A trim
panel
1. Turn over the sealing strip.
2. Use the removal tool of fastening screw to
loosen the snap A;
3. Pull upward the trim panel of column A, and
then loosen the hooks B and C.
4. Install as per the reverse order with that of
removal
Removal of lower trim panel of column B
1. Remove the front doorsill pedals;
2. Remove the rear doorsill pedals;
3. Remove the sealing strip;
4. Remove the hook B from the upper trim panel
of column A;
5. Draw the position of mark A;
6. Pull upward the trim panel.
7. Install as per the reverse order with that of
removal.
Disassembly/assembly of upper trim panel
of column B
1. Remove the fixer on the front safety belt (See
——Seat Safety Belt, Disassembly/ Assembly
of Front Safety belt)
2. Remove the lower trim panel of column B
(See——Disassembly/Assembly of lower trim
panel of column B);
3. Use the removal tool of fastening screw to
loosen the snap A;
4. Pull upward the trim panel and loosen the hook
B to remove the trim panel.
5. Install as per the reverse order with that of
removal.
Disassembly/assembly of front side trim
panel
1. Remove the inner pedal of front doorsill;
2. Turn over the sealing strip;
3. Loosen the snaps A and B from the bodywork,
pull the front side trim panel
Trim panel of
column A
Lower trim panel
of column B
Trim panel of
column B
Front side
trim
panel