Lubrication system
36
Removal/installation of timing sprocket casing
1. Remove the crankshaft pulley (See——Crankshaft Pulley).
2. Remove the cylinder head cover (See——Disassembly instructions of Cylinder Head
Cover).
3. Remove the oil pan (See——Oil Pan, Removal/Installation of Oil Pan).
4. Remove the oil pan body (See——Removal/Installation of Oil Pan Body).
5. Remove the water pump (See——Removal/Installation of Water Pump).
6. Disassemble as per the order shown in Fig., below.
7. Assemble in the reversing order of disassembly.
1
Oil filter (See—Assembly
instructions)
2
Oil pan body (See—Disassembly
and Assembly Instructions)
3 Dipstick guide
4
oil pump and Timing sprocket casing
assemblies (See—Disassembly and
Assembly Instructions)
To Next Page
Loading...