HAIMA 7 - Disassembly;Assembly of Engine Mudguard; Disassembly;Assembly of Rear License Lamp Cover; Disassembly;Assembly of Luggage Rack; Disassembly;Assembly of Front Wheel Mudguard

External accessories
S-25
4. Install as per the reverse order with that of
the removal.
Disassembly/assembly of engine
mudguard
1. As per the order set out in the Table, remove
the screws and snaps.
1 Flange bolt
2 Plough bolt
3 Snap
4 Snap
5 Flange nut
6 Plough bolt
2. Remove the mudguard;
3. Install as per the reverse order with that of
the removal.
Disassembly/assembly of rear license
lamp cover
1. As per the order set out in the Table, Remove
the bolt;
2. Remove the rear license lamp cover;
3. Install as per the reverse order with that of
the removal.
Disassembly/assembly of luggage rack
1. Remove the trim cover;
2. Remove the hexagon nut;
3. Remove the luggage rack;
4. Install as per the reverse order with that of
the removal.
Disassembly/assembly of front wheel
mudguard
1. Remove the front side wall(See——Side
Wall, Disassembly/assembly of Side Wall )
2. Remove the front wheel mudguard as per the
order set out in the Table
1 Snap
2 Self-tapping screws
3 Wheel mudguard
Forward