HAIMA 7 - Replacement of Oil Filer; Others

Use of Engine Service Platform
16
Oil volume L{US qt, lmp qt}
Items Volume
Oil replacement 3.1{3.2, 2.7}
Oil and filter replacement 3.3{3.5, 2.9}
Engine oil grading: more than API/SL.
Oil viscosity option standard Oil viscosity grade
Higher than –25℃{13℉}
SAE 10W–30
–30 ℃～37 ℃{–22 ℉～98 ℉}
SAE 5W–30
Replacement of oil filer
1. Use a special tool to remove the oil filter.
2. Use a piece of clean fabric to clean up the surface of new oil filter.
3. Smear clean oil around the O-ring of new oil filer.
4. Use a special tool to fit the oil filter.
Tightening torque: 14～16N·m{142.3～162.6kgf·cm, 127.5～145.7in·lbf}
5. Start the engine and check for any leakage.
Check whether the oil level needs to add (See——Engine Oil and Check of Engine
Oil).
Others
Other checks and maintenances, e.g. generator and starter etc.,, can be also carried out
on the CBU, please refer to this manual and the CBU-relevant Service Manual.
Oil filter sleeve
Smear clean oil around the O-ring