Power window system
S-8
Power window system
Disassembly/assembly of the main switch of power window
1. Disconnect the negative cable of battery;
2. Remove the front door trim panel (See——Disassembly/Assembly of Trim Panel of Front Doors);
3. Remove the main switch panel;
4. Remove the screws and the main switch of power window.
5. Install as per the reverse order with that of removal;
6. Adjust the reset range (See——Adjustment of Reset Range)
Main switch panel
Clamp
Screw
Main switch of
window regulator
Screw
To Next Page
Loading...