External accessories
S-27
Removal and installation of radiator
grille
1. Remove the fastening bolt and snap A;
2. Remove the snap B;
3. Pull out the grille snap from the bumper and
remove the radiator grille.
4. Install as per the reverse order with that of
the removal.
Removal and installation of rear wheel
mudguard
As per the order set out in the Table, remove the
fastening bolt and nut.
1. Remove the rear wheel mudguard.
2. Assembly as per the reverse order with that
of disassembly
Removal and installation of ventilation
cavity
1. Remove the front wall grille (SeeāāFront
wall grille, removal and installation of front
wall grille);
2. Remove the snaps;
3. Remove the ventilation cavity.
4. Install as per the reverse order with that of
the removal.
To Next Page
Loading...