Basic system
U-9
A：8.8～12.8n·m
B：18.7～27.5n·m
C：7.8～11.8n·m
D：7.8～11.8n·m
E：8.8～12.8n·m
1 Condenser assembly
2 Compressor assembly
3 Pipe subassembly
4 Fluid reservoir assembly
5 Fluid pipe assembly
6 3 high-pressure pipe assembly
Refrigerant pipelines removal instruction
1. loosen the nuts with 2 pieces of spanners, and
then remove the condenser duct or hose.
Refrigerant pipelines installation instruction
1. if new condenser duct and/or hose are installed,
add a supplemental quantity of pag105
compressor oil.
supplemental quantity: 10ml {10cc, 0.3fl oz}
2. apply some compressor oil to the o-ring and
connect the joints.
3. tighten the joints.
(1) tighten the nuts or bolts by hands.
(2) tighten the joint to specified torque. If it is a
nut joint, tighten the nut with a spanner and
torque wrench.
To Next Page
Loading...