Cylinder head and valve mechanisms
42
Removal/installation of water pump
1. Remove the engine belt. (See——Engine
Belt)
2. Disassemble as per the order shown in
Fig.
3. Assemble in the reversing order of
disassembly.
1 Bolt
2 Water pump
Cylinder head and valves
Removal/installation of cylinder head
1. Remove the intake/exhaust manifold (See——Intake/Exhaust System).
2. Remove the timing sprocket (See——Timing Sprocket).
3. Disassembly as shown in Fig.
4. Assemble in the reversing order of disassembly.
necessary after the
disassembly
To Next Page
Loading...