HAIMA 7 - Essentials to Removal of Socket; Lighting System; Essentials to Removal of Ring; Check of Cigar-Lighter

Lighting system
T-3
Essentials to removal of socket
1. Pass through the socket hole with a flathead
screwdriver wrapped with tape, hold the flange
of ring and turn the socket at the meantime.
2. Push forward the socket;
3. Turn clockwise the socket up to the position as
shown in Fig. and pull it out.
Essentials to removal of ring
1. Press the barb and pull forward the ring.
Check of cigar-lighter
1. Turn the ignition switch to the position of ACC
accessory.
2. Confirm that the cigar-lighter bound out within
10-20s after inserted into the socket. If the
cigar-lighter improperly operates, replace the
plug of cigar-lighter and socket.
Cigar
-
lighter
fixing disc
Ring
Socket
Socket
Flange
Section view
Cigar
-
lighter
fixing disc
Hole
Hole
Barb