Flywheel and clutch
62
Disassembly instructions of flywheel
1. Use a special tool (as shown in Fig.) to clamp the flywheel.
2. Dismantle evenly the mounting bolts in several times according to the criss cross order (as
shown in Fig.)
3. Remove the flywheel.
Disassembly instructions of pilot bearing
Attention
l In general, it is unnecessary to disassemble the pilot bearing other than
replacement.
Use a special tools (as shown in Fig.) to disassemble the pilot bearing.
Disassembly instructions of rear oil seal
Attention
l In general, it is unnecessary to disassemble the rear oil seal other than
Gear ring fixture component
Gear ring fixture component
Positioning tool of clutch disc
Needle bearing puller
To Next Page
Loading...