HAIMA 7 - Disassembly;Assembly of Interior Handle

Dormer
S-63
Disassembly/assembly of interior handle
To dismount:
1. Pry up the screw cap A;
2. Remove the self-tapping screw B;
3. Remove the interior handle cover C;
4. Remove the door trim panel D (See——
Disassembly/Assembly of Door Trim Panel).
5. Remove the interior handle E.
Install in the reverse order with the removal.
Note that the Tightening torque of
self-tapping screw B is 3.9～5.9N.m.