Check of front disc brakes
P-14
Essentials to the Disassembly of Piston Seal
Ring:
1. Push out, with the SST, the piston seal ring from
brake calipers.
Removal and installation of the rear disc brake
1. Remove in the order as shown in the Table
2. Assemble in the reversing order of disassembly
3. After installation, step down the brake pedal several times, turn manually the wheel to confirm that no
brake blocking exists.
1 Hollow bolt
See——P Essentials to the Installation of
Internal/External Friction Plate
2 Rear brake hose 7 Rear brake disc
3 Guide pin cover
See——P Essentials to the Removal Brake
Disc
4 Guide pin
See——P Essentials to the Installation of
Brake Disc
5 Rear caliper assembly 8 Guide pin sleeve
6 Internal/external friction plate 9 Bleed screw and bleed screw cover
To Next Page
Loading...