Check of front disc brakes
P-13
1 Guide pin cover
2 Guide pin
3 Compressing spring
4 Internal/external friction plate
5 Support beam
6 Brake caliper assembly
Disassembly and assembly of front brake
caliper
1. Disassemble as per the order shown in the
Table.
2. Assembly in the reversing order of disassembly
1 Piston dust cover
2 Piston
See——P Essentials to the
Disassembly of Piston
3 Piston gasket
See——P Essentials to the
Disassembly of Piston Gasket
4 Bleed screw cover
5 Bleed screw
6 Front caliper body
Essentials to the piston disassembly
Attention
Slowly blow the compressed air into the brake caliper
to prevent sudden run-out of piston.
1. Place the SST into the brake caliper and then
slowly blow the compressed air from the hole
into the brake caliper, enabling the piston to be
pushed out from the brake caliper.
To Next Page
Loading...