Check of front disc brakes
P-12
1 Brake hose
7 Guide pin cover
2 Caliper bolt 8 Guide pin
3 Front caliper assembly 9 Guide pin bushing
4 Compressing spring 10 Front brake disc
5 Internal/external friction plate
See——P Essentials to Removal of
Brake Disc
See——P Essentials to the Installation of
Internal/External Friction Plates
See——P Essentials to Brake Disc
Installation
6 Support beam 11 Bleed screw and bleed screw cap
Essentials to removal of brake disc
1. Prior to the removal, make the mark on the hub
bolt and brake disc for the reference at the
installation time.
Essentials to the installation of brake disc
1. Clean up any rust or grime on the contact
surface of brake disc and hub.
2. Align with the mark made prior to the removal
and fit up the brake disc.
Essentials to the installation of internal
/external friction plate
1. Push down to the end the piston with SST
2. Install the brake pad
Replace the internal/external friction plate
1. Disassemble in the order as shown in the Table.
2. Assemble in the reversing order of disassembly
Mark
Wood plate
To Next Page
Loading...