Anti-lock brake system (ABS control unit)
P-34
Removal and installation of wheel speed sensors of front/rear ABS control units
1. Disassemble in the order as shown in the Table, the wheel speed sensor of front ABS control unit (R
same as L).
2. Assemble in the reversing order of disassembly.
1 Connector of front wheel speed sensor
2 Locknut
3 Locking bolt
4 Locking bolt
5 Upper holder of speed sensor on the left front wheel
6 Lower holder of speed sensor on the right front wheel
7 Harness of front wheel speed sensor
Removal and installation of wheel speed sensor on the rear ABS control unit
To Next Page
Loading...