HAIMA 7 - Doors Other than the Driver Side

Power Window System
S-10
Doors other than the driver side
1. Remove the main switch of power window (See——Disassembly/Assembly of the Main Switch of
Power Window);
2. Rotate the power off switch to the UNLOCK position;
3. Check, with an ohmmeter the terminal connection of power window main switch
l If abnormal, replace it.
Occupant side front door
Continuity
Continuity
Switch position
Window closing
OFF
Window opening
Terminal
Rear right door
Switch position
Window closing
OFF
Window opening
Terminal
Driver-side
Occupant
-side
Rear
left
Rear
right
Continuity
Power off switch
Terminal
Unlocked
Switch
position
Locked
Power window switch
Power window switch
Element side connector
(viewed from the terminal
side)
Element side connector
(viewed from the terminal
side)
Continuity
Rear left door
Switch position
Window closing
OFF
Window opening
Terminal