Intake and Exhaust Systems
27
Intake and exhaust systems
Removal/installation of intake and exhaust systems
1. Disassemble as per the order shown in Fig.
2. Assemble in the reversing order of disassembly.
1 Thermal shield of exhaust manifold
2 Exhaust manifold
3 Exhaust manifold gasket
4 Throttle body
5
Sealant ring of throttle body (See
Assembly Instructions)
6 Intake manifold
7
Sealant ring of intake manifold (See
Assembly instructions)
Assembly instructions of intake manifold sealant ring
At the installation time, you shall properly put the sealant ring into the groove of intake manifold
and enable the error proofing mark to clamp into the positioning groove of intake manifold.
Caution
l Prior to the installation, the sealant ring shall be checked for any damaged, if
Positioning
groove
Proofing
mark
To Next Page
Loading...