HAIMA 7 - Disassembly;Assembly of Side Trim Panel of Trunk; Disassembly;Assembly of Trim Panel of Back Door; Disassembly;Assembly of Trim Panel of Column D

Inner trim panel
S-48
5. Install as per the reverse order with that of
removal.
Disassembly/assembly of side trim panel of
trunk
1. Remove first the pedal of rear door
(See——Disassembly/Assembly of Pedal of
Rear Doors)
2. Remove the pedal of back door (See——
Disassembly/Assembly of Back Door Pedal)
3. Take out the trunk carpet and base plate;
4. Use the removal tool of fastening screw
to remove the screw B;
5. Loosen the snap C;
6. Use the removal tool of fastening screw
to loosen the snap A, to remove the trunk
trim panel;
7. Install in the reverse order with that of
removal.
Disassembly/assembly of trim panel of
back door
1. Use the removal tool of fastening screw to
remove the snap C;
2. Remove then the snap B (Now, you need to
hold the trim panel to prevent damage due to
bending downward)
3. Use the removal tool of fastening screw to
remove the snap A, and then remove the trim
panel of back door.
Installation
Use the lock pin on the trim panel for positioning;
install the snaps A and B in place, and then the snap
C.
Disassembly/assembly of trim panel of
column D
1. Remove the side trim panel of trunk
(See——Removal/Installation of Trunk Trim
Panel).
2. Turn over the sealing strip.
3. Remove the snaps Ａ , Ｂ , Ｃ and Ｄ to
remove the trim panel on the column D.
Install in the reverse order with that of removal.
Trim panel of
column C
Trunk trim panel
Trim panel of
back door
Trim panel on the
column D