HAIMA 7 - Lubrication System of Tensioner; Instructions to the Removal of Tensioner; Disassembly Instructions of Crankshaft Pulley; Disassembly Instructions of Cylinder Head Cover

Timing sprocket
30
Lubrication system of tensioner
1. Disassembly as per the order shown in Fig.
2. Assemble in the reversing order of disassembly.
Instructions to the removal of tensioner
1. Unscrew the tensioner bolt.
2. Slowly take out the tensioner (prevent a sudden pop-up of plunger).
Disassembly instructions of crankshaft pulley
Use a special tool to fix the crankshaft for disassembly.
Disassembly instructions of cylinder head cover
Unscrew the bolts in 2-3 steps as per the order shown in Fig.t.
Disassembly instructions of timing sprocket
1. Fit the lock bolt of crankshaft pulley.
2. Turn clockwise the crankshaft and align with the valve check sign.
l Key slot of timing sprocket faced upward.
l Align with the valve check sign on the intake and exhaust of VVT timing
sprocket.
3. Disassemble the tensioner (See——Disassembly of Tensioner).
4. Remove the tensioner arm.
5. Remove the timing sprocket rail.
6. Remove the timing sprocket.
Bolt component
Fixture component
Studded connection fixture