Parking Brake System
P-17
Parking Brake System
Removal and Installation of Parking Brake Handle
1. Disassemble in the order as shown in the Table.
2. Assemble in the reversing order of disassembly.
3. Adjust the travel of parking brake handle.
1
Auxiliary instrument panel: SeeāāS
Auxiliary Instrument Panel
9
Support spring and clamping pin of
brake shoe
2
Mounting bolts of parking handle and
bracket
10 Upper/lower return springs
3 Parking brake handle 11 Parking adjustment mechanism
4 Mounting bolt of parking cable 12 Push plate and brake plate assembly
5 Guide pin cover 13 Brake shoe
6 Guide pin
14
Front draw wire and rear parking
inhaul cable assemblies(L/R)
7 Rear brake calipers
8 Rear brake disc 15 Parking handle holder
To Next Page
Loading...