Power door lock system
S-17
Power door lock system
Disassembly/assembly of power door lock
1. Disconnect the negative cable of battery;
2. Dismantle the cap of interior handle (See——Disassembly/Assembly of Interior Handle Cap);
3. Dismantle the door trim panel (See——Disassembly/Assembly of Door Trim Panel);
4. Dismantle the component of interior handle (See——Disassembly/Assembly of Interior Handle
Component);
5. Take out the interior lock cable and interior handle cable 1 from the interior handle component;
6. Dismantle the pedestal of exterior handle (See——Disassembly/Assembly of Exterior Handle);
7. Take out the exterior handle cable 2 from the exterior handle pedestal;
8. Take out the tie bar 3 of front door lock key from the lock core of left front door;
9. Unscrew the bolt 4;
10. Assembly in the reverse order with that of disassembly.
To Next Page
Loading...