Ignition and control systems
23
Ignition and control systems
Lubrication system of ignition and PVC valve
Caution
l When removing the ignition coil and spark plug, it is very easy to tear up the
extension bar sheath, therefore, disassemble it when the replacement is
necessary. At the disassembly time, be cautious to avoid tearing or damage.
1. Disassemble in the order as shown in Fig.
2. Assemble in the reversing order of disassembly.
1 Ignition coil
2
Spark plug (See——Removal/Installation
of Spark Plug)
3
Positive Crankcase
Ventilation(PCV)valve (See——Check of
PVC valve)
Instructions of plug removal/installation
Caution
l The spark plugs have to be carefully fitted, as the powerful strike will result in
spark plug damage.
To Next Page
Loading...