Use of diagnostic steps
GI-11
Adjustment
In the adjustment, use an appropriate ruler or
measuring apparatus.
Rubber parts and pipe
Avoid gasoline or oil to drop onto the rubber parts or
pipe.
Hose clamp
In the reassembly，the pipe clamp should be placed
on the original assembly position of pipe， and
adjusted to the most suitable place by clamping with
the slip joint pliers.
Formula of torque
When using a torque wrench or equipment，the torque
stated in written has to be recalculated according to
the additional length of special tool of torque wrench
or apparatus. The recalculation uses the following
formulas, where a corresponding group shall be
selected for the calculation.
Pliers
In use of vices，a protection disc of pliers shall be
added to prevent damage on the part.
A.
The length in front of the drive part of
torque wrench of special tool or apparatus
B. The length of the torque wrench
To Next Page
Loading...