Intake and Exhaust Systems
28
yes, it shall be replaced.
Installation instructions of throttle body sealant ring
At the installation time, you shall properly put the sealant ring into the groove of throttle body
and enable the error proofing mark to clamp into the positioning groove of throttle body.
Caution;
l Prior to the installation, the seal strip shall be checked for any damaged, if yes,
it shall be replaced
Installation instructions of exhaust manifold gasket
At the installation time, raised part of spacer shall face to the exhaust manifold.
Positioning groove
Error proofing mark
Bulge part of rib faces
to the exhaust manifold
Bulge part of rib faces
to the exhaust manifold
To Next Page
Loading...