HAIMA 7 - Adjustment of Rear Doors; Disassembly;Assembly of Door Lock Latch

Doors
S-7
Adjustment of rear doors
1. Measure the clearance between the rear door
and bodywork.
l If abnormal, loosen the mounting bolts of
door hinge or and mounting screws of
door lock and readjust the position of
door.
2. Fasten bolts.
Disassembly/assembly of door lock latch
1. Remove the screws;
2. Remove the door lock latch;
3. The installation is in the reverse order with that
of removal.
Clearance:
Section view A-A
Section view B-B
Door lock latch
Screw