Lubrication system
34
Lubrication system
Removal/installation of oil pan
1. Drain out the engine oil (See——Check
on the CBU, Replacement of Engine Oil).
2. Disassemble as per the order show in
Fig. below
3. Assemble in the reversing order of
disassembly.
1
Drain plug
2
Bolt
3
Oil pan
See——Removal/installation
instructions
Disassembly instructions of oil pan
1. Remove the oil pan bolt.
2. Remove sealant from the bolt threads.
3. Screw in a bolt on the welded nut so to save a small clearance between the oil pan and oil
pan body.
4. Use a split tool to dismantle the oil pan.
Apply sealant all around
before installation
Need to replace parts
after removal
Welded nut
Split tool
To Next Page
Loading...