HAIMA 7 - Timing Sprocket; Lubrication System of Timing Sprocket

Timing sprocket
29
Timing sprocket
Lubrication system of timing sprocket
1. Remove the engine belt (See——Generator).
2. Remove the camshaft position sensor and crankshaft position sensor (See——Ignition and
Control Systems).
3. Remove the ignition coil (See——Ignition).
4. Remove the cylinder head cover (See——Cylinder Head Cover).
5. Remove the timing sprocket casing (See——Timing Sprocket Casing).
6. Remove the oil pan.
7. Remove the oil pan body.
8. Disassemble as per the order shown in Fig.
9. Assemble in the reversing order of disassembly.
10. Adjust the deflection/tension of engine belt (See——Generator).
11. Check the clearance of crankshaft position sensor (See——Ignition and Control Systems).
1 Tensioner
2 Tensioner arm
3 Timing sprocket guide
4 Timing sprocket
5 Upper guide of timing sprocket
6 Exhaust VVT
7 Intake VVT
8 Timing sprocket
Other thread torque not indicated: