Flywheel and clutch
65
Assembly instructions of clutch disc plate
Use as special tool (as shown in Fig.) to hold the position of clutch disc plate.
Assembly instructions of clutch compressing disc
1. Use a special tool to jam the flywheel and localize the clutch (as shown in Fig.).
2. Evenly tighten the bolts according to criss cross order (as shown in Fig.)
Check of clutch compressing disc
1. Measure the wear of diaphragm spring.
l If the standard exceeded, the clutch compressing disc shall be replaced.
Depth: ≤0.6mm {0.024in}
Sleeve mounting device
Clutch disc positioning tool
Gear ring fixture component
Handle
Clutch disc positioning tool
To Next Page
Loading...