Check of front disc brakes
P-16
Disassembly/assembly of rear brake
calipers
1. Disassemble as per the order shown in the
Table.
2. Assembly in the reversing order of disassembly
1 Piston dust cover
2 Piston
See——P piston disassembly
essentials to the
3 Piston gasket:
See——P piston gasket disassembly
essentials to the
4 Bleed screw cover
5 Bleed screw
6 Rear caliper body
Piston disassembly essentials to the
Attention
Slowly blow the compressed air into brake caliper to
prevent sudden run-out of piston.
1. Place the SST into the brake caliper and then
slowly blow the compressed air from the hole
into the brake caliper, enabling the piston to be
pushed out from the brake caliper.
Essentials to the Disassembly of Piston
Gasket
1. Remove with the SST the piston gasket from
the brake calipers.
To Next Page
Loading...