HAIMA 7 - Page 383

Steering system
N-8
Decomposition of steering pinion and torsion rod
● Decompose as per the order shown in the Table.
1 Oil pipes 1 and 2
2 Inlet pipe
3 Outside tie rod assembly
4 Tie rod lock nut
5 Small clip
6 Dust cover
7 Clamp
8 Inside tie rod assembly
9
Lock nut(adjusting cap): Refer to
decomposition description
10 Adjusting cap
11 Spring
12 Briquetting plug
13 Lock bolt
14
Pinion shaft and valve chamber components
·Refer to the Decomposition Description
15
Pinion shaft components
·Refer to the Decomposition Description
16 Spring snap ring
17 Control valve
18 Seal ring
19 Pinion shaft
20 Valve body components
21
Oil seal:
Refer to the Decomposition Description
22
Upper bearing:
Refer to the Decomposition Description
23 Valve casing
24 “O” ring
25 Snap ring
26 Rack block
27 “O” ring
28 Rack bushing assembly
29 Piston
30 Oil seal
31 Gear rack
32
Rubber cushion block :
Refer to the Decomposition Description
33 Bracket
34 Steering casing
35
Steering tie rod ball dust cover
·Refer to the Decomposition Description