HAIMA 7 - Page 399

Front suspension
R-7
Removal instruction of front bushing of swing
arm
1. Remove the front bushing of swing arm while
pressing down with the SST
Installation instruction of front bushing of swing
arm
1. Use the SST maintenance tool to compress the
new bushing into the swing arm body.
Installation instruction of rear bushing of swing
arm
1. As shown in Fig., in purpose of correct
installation， mark on the swing arm body,
through the alignment with the small boss of
rear bushing of swing arm.
2. Compress by use of the SST maintenance tool
and remove the rear bushing of swing arm.
Installation instruction of rear bushing of swing
arm
1. As shown in Fig., align the mark on the swing
arm with the small boss on the rear bushing of
swing arm:
2. Fit up the swing arm body on the SST
maintenance tool;
3. Compress the rear bushing of new swing arm
by use of SST maintenance tool.
Press
-
in by a
hydraulic presser
Front bushing
SST
SST
Press
-
in by a
hydraulic presser
Front bushing
SST
SST
Small boss
Small boss
Sign
Sign
Press
-
in by a
hydraulic presser
Front bushing
SST
SST