13.1 General Specifications
392
4.Environmental and Safety Specifications
Operating temperature and
humidity
0 to 40°C (32 to 104°F),80% RH or less (non-condensating)
Storage temperature and
humidity
-10 to 50°C (15 to 122°F) 80% RH or less (non-condensating)
Operating environment Indoors, Pollution degree 2, altitude up to 2000 m (6562-ft.)
Rated supply voltage AC90 V to 264 V
Rated supply frequency 50/ 60 Hz
Maximum rated power
consumption
150 VA
Dimensions Approx. 330 W × 119 H × 307 D mm (12.99" W × 4.69" H × 12.09" D) (excluding protrusions)
Mass Approx. 5.8 kg (204.6 oz.)
Applicable StandardsSafety
EMC
EN61010
EN61326 Class A
EN61000-3-2
EN61000-3-3
Influence of radiation induced by radio frequency electromagnetic fields: Z in 10 V/m:
±5% rdg : ±5
Influence of conduction induced by radio-frequency fields: Z in 3 V: ±5% rdg : ±5
Dielectric strength Between the power wire and ground wire: 1.62 kV AC for 60 seconds
5.Accessories, Options
Accessories Power Cord...................................................... 1
Instruction Manual........................................... 1
Communication Instruction Manual (CD)......... 1
Options Model 9261-10 Test Fixture
Model 9262 Test Fixture
Model L2001 Pincher Probe
Model IM9901 Contact Tips (for model L2001)
Model IM9902 Contact Tips (for model L2001)
Model 9263 SMD Test Fixture
Model 9677 SMD Test Fixture
Model 9699 SMD Test Fixture
Model 9699 SMD Test Fixture
Model IM9100 SMD Test Fixture
Model L2000 4-Terminal Probe
Model 9140-10 4-Terminal Probe
Model 9500-10 4-Terminal Probe
Model IM9000 Equivalent Circuit Analysis Firmware
Model 9268-10 DC Bias Voltage Unit
Model 9269-10 DC Bias Current Unit
To Next Page
Loading...
