Keysight Technologies InfiniiVision MSO-X 4022A

1020 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
30 :SEARch Commands
:SEARch:TRANsition:QUALifier
(see page 1428)
Command Syntax
:SEARch:TRANsition:QUALifier <qualifier>
<qualifier> ::= {GREaterthan | LESSthan}
The :SEARch:TRANsition:QUALifier command specifies whether to search for edge
transitions greater than or less than a time.
Query Syntax
:SEARch:TRANsition:QUALifier?
The :SEARch:TRANsition:QUALifier? query returns the current transition search
qualifier.
Return Format
<qualifier><NL>
<qualifier> ::= {GRE | LESS}
See Also • Chapter 30, “:SEARch Commands,” starting on page 993
• ":SEARch:MODE" on page 997
• ":SEARch:TRANsition:TIME" on page 1023