Keysight Technologies InfiniiVision MSO-X 4022A

632 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:CLResponse:PPDecade
(see page 1428)
Command Syntax
:POWer:CLResponse:PPDecade <pts>
<pts> ::= {10 | 20 | 30 | 40 | 50}
The :POWer:CLResponse:PPDecade command selects the number of frequency
test points per decade (in the log scale).
Query Syntax
:POWer:CLResponse:PPDecade?
The :POWer:CLResponse:PPDecade? query returns the points per decade setting.
Return Format
<pts><NL>
<pts> ::= {10 | 20 | 30 | 40 | 50}
See Also • ":POWer:CLResponse" on page 626
• ":POWer:CLResponse:APPLy" on page 627
• ":POWer:CLResponse:DATA" on page 628
• ":POWer:CLResponse:FREQuency:MODE" on page 629
• ":POWer:CLResponse:FREQuency:STARt" on page 630
• ":POWer:CLResponse:FREQuency:STOP" on page 631
• ":POWer:CLResponse:SOURce:INPut" on page 633
• ":POWer:CLResponse:SOURce:OUTPut" on page 634
• ":POWer:CLResponse:WGEN:LOAD" on page 635
• ":POWer:CLResponse:WGEN:VOLTage" on page 636
• ":POWer:CLResponse:WGEN:VOLTage:PROFile" on page 637