Keysight Technologies InfiniiVision MSO-X 4022A

:POWer Commands 26
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 675
:POWer:PSRR:SOURce:OUTPut
(see page 1428)
Command Syntax
:POWer:PSRR:SOURce:OUTPut <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :POWer:PSRR:SOURce:OUTPut command selects the oscilloscope channel
that is probing the power supply output.
Query Syntax
:POWer:PSRR:SOURce:OUTPut?
The :POWer:PSRR:SOURce:OUTPut? query returns the channel selection.
Return Format
<source><NL>
<source> ::= CHAN<n>
See Also • ":POWer:PSRR" on page 667
• ":POWer:PSRR:APPLy" on page 668
• ":POWer:PSRR:DATA" on page 669
• ":POWer:PSRR:FREQuency:MAXimum" on page 670
• ":POWer:PSRR:FREQuency:MINimum" on page 671
• ":POWer:PSRR:FREQuency:MODE" on page 672
• ":POWer:PSRR:PPDecade" on page 673
• ":POWer:PSRR:SOURce:INPut" on page 674
• ":POWer:PSRR:WGEN:LOAD" on page 676
• ":POWer:PSRR:WGEN:VOLTage" on page 677
• ":POWer:PSRR:WGEN:VOLTage:PROFile" on page 678