Keysight Technologies InfiniiVision MSO-X 4022A

1042 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
30 :SEARch Commands
:SEARch:SERial:FLEXray:DATA
(see page 1428)
Command Syntax
:SEARch:SERial:FLEXray:DATA <string>
<string> ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X }
The :SEARch:SERial:FLEXray:DATA command specifies the data value to find when
searching for FlexRay frames.
The length of the data value is specified by the
:SEARch:SERial:FLEXray:DATA:LENGth command.
Query Syntax
:SEARch:SERial:FLEXray:DATA?
The :SEARch:SERial:FLEXray:DATA? query returns the current data value setting.
Return Format
<string><NL>
<string> ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X }
See Also • Chapter 30, “:SEARch Commands,” starting on page 993
• ":SEARch:SERial:FLEXray:MODE" on page 1045
• ":SEARch:SERial:FLEXray:DATA:LENGth" on page 1043