Keysight Technologies InfiniiVision MSO-X 4022A

1112 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SYSTem Commands
:SYSTem:PROTection:LOCK
(see page 1428)
Command Syntax
:SYSTem:PROTection:LOCK <on_off>
<on_off> ::= {{1 | ON} | {0 | OFF}}
The :SYSTem:PROTection:LOCK command disables the fifty ohm impedance
setting for all analog channels.
Query Syntax
:SYSTem:PROTection:LOCK?
The :SYSTem:PROTection:LOCK? query returns the analog channel protection lock
status.
Return Format
<on_off><NL>
<on_off> ::= {1 | 0}
See Also • "Introduction to :SYSTem Commands" on page 1104