Keysight Technologies InfiniiVision MSO-X 4022A

924 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
29 :SBUS<n> Commands
:SBUS<n>:SENT:TRIGger:SLOW:DATA
(see page 1428)
Command Syntax
:SBUS<n>:SENT:TRIGger:SLOW:DATA <data>
<data> ::= when ILENgth = SHORt, from -1 (don't care) to 65535, in NR1 f
ormat.
<data> ::= when ILENgth = LONG, from -1 (don't care) to 4095, in NR1 for
mat.
The :SBUS<n>:SENT:TRIGger:SLOW:DATA command specifies the data to trigger
on for the Slow Channel Message ID and Data trigger mode.
Query Syntax
:SBUS<n>:SENT:TRIGger:SLOW:DATA?
The :SBUS<n>:SENT:TRIGger:SLOW:DATA? query returns the data value setting
for the slow channel ID and data trigger.
Return Format
<data><NL>
<data> ::= when ILENgth = SHORt, from -1 (don't care) to 65535, in NR1 f
ormat.
<data> ::= when ILENgth = LONG, from -1 (don't care) to 4095, in NR1 for
mat.
See Also • ":SBUS<n>:SENT:CLOCk" on page 900
• ":SBUS<n>:SENT:CRC" on page 901
• ":SBUS<n>:SENT:DISPlay" on page 902
• ":SBUS<n>:SENT:FORMat" on page 904
• ":SBUS<n>:SENT:IDLE" on page 906
• ":SBUS<n>:SENT:LENGth" on page 907
• ":SBUS<n>:SENT:PPULse" on page 908
• ":SBUS<n>:SENT:SIGNal<s>:DISPlay" on page 909
• ":SBUS<n>:SENT:SIGNal<s>:LENGth" on page 910
• ":SBUS<n>:SENT:SIGNal<s>:MULTiplier" on page 912
• ":SBUS<n>:SENT:SIGNal<s>:OFFSet" on page 913
• ":SBUS<n>:SENT:SIGNal<s>:ORDer" on page 914
• ":SBUS<n>:SENT:SIGNal<s>:STARt" on page 916
• ":SBUS<n>:SENT:SOURce" on page 918
• ":SBUS<n>:SENT:TOLerance" on page 920
• ":SBUS<n>:SENT:TRIGger" on page 921
• ":SBUS<n>:SENT:TRIGger:FAST:DATA" on page 923
• ":SBUS<n>:SENT:TRIGger:SLOW:ID" on page 926