Keysight Technologies InfiniiVision MSO-X 4022A

260 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
6 Root (:) Commands
:STOP
(see page 1428)
Command Syntax
:STOP
The :STOP command stops the acquisition. This is the same as pressing the Stop
key on the front panel.
See Also • "Introduction to Root (:) Commands" on page 226
• ":RUN" on page 256
• ":SINGle" on page 258
Example Code • "Example Code" on page 256