536 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
22 :MEASure Commands
:MEASure:STATistics:RSDeviation
(see page 1428)
Command Syntax
:MEASure:STATistics:RSDeviation {{0 | OFF} | {1 | ON}}
The :MEASure:STATistics:RSDeviation command disables or enables relative
standard deviations, that is, standard deviation/mean, in the measurement
statistics.
Query Syntax
:MEASure:STATistics:RSDeviation?
The :MEASure:STATistics:RSDeviation? query returns the current relative standard
deviation setting.
Return Format
{0 | 1}<NL>
See Also • "Introduction to :MEASure Commands" on page 488
• ":MEASure:RESults" on page 523
• ":MEASure:STATistics" on page 531
• ":MEASure:STATistics:DISPlay" on page 532
• ":MEASure:STATistics:MCOunt" on page 534
• ":MEASure:STATistics:RESet" on page 535
• ":MEASure:STATistics:INCRement" on page 533
To Next Page
Loading...
