708 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:TRANsient:APPLy
(see page 1428)
Command Syntax
:POWer:TRANsient:APPLy
The :POWer:TRANsient:APPLy command applies the transient analysis using the
initial current and new current settings.
See Also • ":POWer:TRANsient:EXIT" on page 709
• ":POWer:TRANsient:IINitial" on page 710
• ":POWer:TRANsient:INEW" on page 711
• ":POWer:TRANsient:NEXT" on page 712
• ":MEASure:TRESponse" on page 576
To Next Page
Loading...
