Keysight Technologies InfiniiVision MSO-X 4022A User Manual

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 979
:SBUS<n>:LIN:SOURce
(see page 1610)
Command Syntax
:SBUS<n>:LIN:SOURce <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :SBUS<n>:LIN:SOURce command sets the source for the LIN signal.
Query Syntax
:SBUS<n>:LIN:SOURce?
The :SBUS<n>:LIN:SOURce? query returns the current source for the LIN signal.
Return Format
<source><NL>
See Also • "Introduction to :TRIGger Commands" on page 1295
• ":TRIGger:MODE" on page 1308
• ":SBUS<n>:LIN:TRIGger" on page 982
• ":SBUS<n>:LIN:SIGNal:DEFinition" on page 1543

Keysight Technologies InfiniiVision MSO-X 4022A Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision MSO-X 4022A
Category	Test Equipment
Language	English