Keysight Technologies InfiniiVision MSO-X 4022A

690 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:SIGNals:IEXPected
(see page 1428)
Command Syntax
:POWer:SIGNals:IEXPected <value>[suffix]
<value> ::= Expected current value in NR3 format
[suffix] ::= {A | mA}
The :POWer:SIGNals:IEXPected command specifies the expected inrush current
amplitude. This value is used to set the vertical scale of the channel probing
current.
Query Syntax
:POWer:SIGNals:IEXPected?
The :POWer:SIGNals:IEXPected query returns the expected inrush current setting.
Return Format
<value><NL>
<value> ::= Expected current value in NR3 format
See Also • ":POWer:INRush:APPLy" on page 654
• ":POWer:SIGNals:AUTosetup" on page 681
• ":POWer:SIGNals:OVERshoot" on page 691
• ":POWer:SIGNals:VMAXimum:INRush" on page 692
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 698
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 699