:HARDcopy Commands 19
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 439
:HARDcopy:NETWork:DOMain
(see page 1428)
Command Syntax
:HARDcopy:NETWork:DOMain <domain>
<domain> ::= quoted ASCII string
The :HARDcopy:NETWork:DOMain command sets the Windows network domain
name.
The domain name setting is a common setting for both network printer slots.
Query Syntax
:HARDcopy:NETWork:DOMain?
The :HARDcopy:NETWork:DOMain? query returns the current Windows network
domain name.
Return Format
<domain><NL>
<domain> ::= quoted ASCII string
See Also • "Introduction to :HARDcopy Commands" on page 430
• ":HARDcopy:NETWork:SLOT" on page 441
• ":HARDcopy:NETWork:APPLy" on page 438
• ":HARDcopy:NETWork:ADDRess" on page 437
• ":HARDcopy:NETWork:USERname" on page 442
• ":HARDcopy:NETWork:PASSword" on page 440
To Next Page
Loading...
