650 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:HARMonics:RUNCount
(see page 1428)
Query Syntax
:POWer:HARMonics:RUNCount?
Returns the current harmonics analysis' run iteration count. Non Spec values (that
is, harmonics values not specified by the selected standard) are not counted.
Return Format
<count><NL>
<count> ::= integer in NR1 format
See Also • ":POWer:HARMonics:FAILcount" on page 645
• ":POWer:HARMonics:APPLy" on page 642
• ":POWer:HARMonics:DATA" on page 643
• ":POWer:HARMonics:DISPlay" on page 644
• ":POWer:HARMonics:LINE" on page 646
• ":POWer:HARMonics:POWerfactor" on page 647
• ":POWer:HARMonics:STANdard" on page 651
• ":POWer:HARMonics:STATus" on page 652
• ":POWer:HARMonics:THD" on page 653
To Next Page
Loading...
