1274 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
35 :WGEN<w> Commands
:WGEN<w>:ARBitrary:BYTeorder
(see page 1428)
Command Syntax
:WGEN<w>:ARBitrary:BYTeorder <order>
<w> ::= 1 or 2 in NR1 format
<order> ::= {MSBFirst | LSBFirst}
The :WGEN<w>:ARBitrary:BYTeorder command selects the byte order for binary
transfers.
Query Syntax
:WGEN<w>:ARBitrary:BYTeorder?
The :WGEN<w>:ARBitrary:BYTeorder query returns the current byte order
selection.
Return Format
<order><NL>
<order> ::= {MSBFirst | LSBFirst}
See Also • ":WGEN<w>:ARBitrary:DATA" on page 1275
• ":WGEN<w>:ARBitrary:DATA:DAC" on page 1278
To Next Page
Loading...
