398 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
18 :FUNCtion<m> Commands
:FUNCtion<m>:BUS:YORigin
(see page 1428)
Command Syntax
:FUNCtion<m>:BUS:YORigin <value>
<m> ::= 1 to (# math functions) in NR1 format
<value> ::= value at bus code = 0, in NR3 format
The :FUNCtion<m>:BUS:YORigin command specifies the value associated with
Chart Logic Bus data equal to zero.
Query Syntax
:FUNCtion<m>:BUS:YORigin?
The :FUNCtion<m>:BUS:YORigin query returns the value for associated with data
equal to zero.
Return Format
<value><NL>
<value> ::= value at bus code = 0, in NR3 format
See Also • ":FUNCtion<m>:OPERation" on page 416
To Next Page
Loading...
