:COMPliance Commands 11
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 335
:COMPliance:USB:TEST:TYPE
(see page 1428)
Command Syntax
:COMPliance:USB:TEST:TYPE <type>
<type> ::= {NEARend | FARend}
When a Hi-Speed test has been selected, the :COMPliance:USB:TEST:TYPE
command selects whether the test type is near-end or far-end.
Query Syntax
:COMPliance:USB:TEST:TYPE?
The :COMPliance:USB:TEST:TYPE? query returns the selected test type.
Return Format
<type><NL>
<type> ::= {NEAR | FAR}
See Also • ":COMPliance:USB:TEST" on page 333
To Next Page
Loading...
