Keysight Technologies InfiniiVision MSO-X 4022A

688 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:SIGNals:DURation:RIPPle
(see page 1428)
Command Syntax
:POWer:SIGNals:DURation:RIPPle <value>[suffix]
<value> ::= value in NR3 format
[suffix] ::= {s | ms | us | ns}
The :POWer:SIGNals:DURation:RIPPle command specifies the duration of the
output ripple analysis.
Query Syntax
:POWer:SIGNals:DURation:RIPPle?
The :POWer:SIGNals:DURation:RIPPle query returns the set duration time value.
Return Format
<value><NL>
<value> ::= value in NR3 format
See Also • ":POWer:RIPPle:APPLy" on page 680
• ":POWer:SIGNals:AUTosetup" on page 681
• ":POWer:SIGNals:IEXPected" on page 690
• ":POWer:SIGNals:OVERshoot" on page 691
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 698
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 699