:SBUS<n> Commands 29
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 827
:SBUS<n>:FLEXray:BAUDrate
(see page 1428)
Command Syntax
:SBUS<n>:FLEXray:BAUDrate <baudrate>
<baudrate> ::= {2500000 | 5000000 | 10000000}
The :SBUS<n>:FLEXray:BAUDrate command specifies the baud rate as 2.5 Mb/s,
5 Mb/s, or 10 Mb/s.
Query Syntax
:SBUS<n>:FLEXray:BAUDrate?
The :SBUS<n>:FLEXray:BAUDrate? query returns the current baud rate setting.
Return Format
<baudrate><NL>
<baudrate> ::= {2500000 | 5000000 | 10000000}
See Also • "Introduction to :TRIGger Commands" on page 1139
• ":SBUS<n>:FLEXray Commands" on page 824
To Next Page
Loading...
